BMW X1 2018 Owner's Manual page 123

▷ Unintentional shifting from selector lever po‐
sition P into another selector lever position.
1. To release the selector lever lock: with the
brake pedal depressed, press the button on
the front of the selector lever.
2. Move the selector lever into the desired posi‐
tion.
Engaging selector lever
positions: with a tap-operated
selector lever
General information
To prevent the vehicle from creeping after you
select a drive mode, maintain pressure on the
brake pedal until you are ready to start.
Functional requirements
Only when the brake pedal is depressed is it
possible to change from selector lever position P
to another selector lever position.
Depending on the transmission version, the en‐
gine may have to be running too.
Online Edition for Part no. 01402120596 - II/18
Driving
Engaging selector lever position D,
N, R
A selector lever lock prevents the following faulty
operation:
▷ Unintentional shifting into selector lever posi‐
tion R.
▷ Unintentional shifting from selector lever po‐
sition P into another selector lever position.
1. Press and hold the button to release the se‐
lector lever lock.
2. With the driver's safety belt fastened, briefly
push the selector lever in the desired direc‐
tion, past a resistance point, if needed. The
selector lever automatically returns to the
center position when released.
CONTROLS
123