Multi-Level Security Arming - Clifford Matrix RSIII Owner's Manual

Disarming while driving
Press on the remote control or simply turn off the ignition
to disarm the system. The lights will flash twice, the doors will
unlock, the siren will chirp twice, and the status LED will turn
off. The remote control will beep twice (or vibrate). The disarm
(8) icon will flash for three seconds and the disarm status icon (6)
will be displayed on the LCD.
note: If the remote control received a Warn Away
Triggered Response Page while armed, the first press of the
unlock button will clear the page alert. A second press will
turn the siren off, and a third press will disarm the system.
➜

multi-level security arming

Multi-Level Security Arming allows you to select which of the
system's inputs or sensors will be active and which will be bypassed
when the system is armed. (See Table of Zones section of this
guide.) Pressing
within five seconds of arming the system will activate the Multi-
Level Security feature. Each press of
security level, and the remote will beep or vibrate once and the arm
icon (7) will flash on the LCD. The system will respond as follows.
➤
Press once: The siren chirps once and the system is
armed.
➤ Press a second time within five seconds: The siren chirps
twice followed by a long chirp. Zone 2 is now bypassed.
➤ Press a third time within five seconds: The siren chirps
three times followed by a long chirp. Zone 4 is now bypassed.
22
(only in Standard Configuration) again
will select a different
© 2002 directed electronics, inc.
or
®