Table of Contents
Related Manuals for ubiquoss C524W
Summary of Contents for ubiquoss C524W
- Page 1 PON ONT GE-PON ONT 524W 524W Installation Guide Installation Guide ubiQuoss Inc. 24F Millennium B/D, 467-12 Dogok-Dong Gangnam-Gu, Seoul 135-700 Korea TEL: +82-70-8666-5000 FAX: +82-2-2190-3201 E-mail: oversea.team@ubiQuoss.com...
-
Page 2: Key Features
GE-PON OLT (Optical Line Terminal) and RN (Remote Node) via a fiber optic cable to provide internet and voice service. C524W is connected to the IP terminal devices such as a subscriber’s home- gateway, PC, laptops, smart phones or VoIP phone. It prov... -
Page 3: Contents Of The Package
PON ONT Contents of the Package User Guide RJ45 Cable C524W Power Adaptor Precautions Warning fore y u install the C5 24W, read this section. This section contains import ant safety information u should know before working with the system. -
Page 4: Disposing Of The System
PON ONT power supplies. For DC power supplies, locate the circuit breaker on the panel board that services the DC circuit, switch the circuit breaker to the off position, and tape the switch handle of the circuit breaker in the off positio ... -
Page 5: Installation
C524W by pushing them until you hear a clicking so und. 2. Connect C524W and PC with Ethernet cable. 3. Connect C524W and Phone with RJ11 cable. 4. Connect the rated power adaptor (12V 1.5A) provided together with C524W main body. PON Splitter 5. Turn on the power switch. - Page 6 PON ONT 8. Make sure that the PON LED is ON in several seconds or mi nutes. If PON LED is red, the optical sig nal is very low, so please contact the carrier. 9. If everything is installed properly, the user can see the DATA LED blink while Internet data is sent / received.
- Page 7 PON ONT System Architecture Front Panel Name Color Status Function Actions to take Power ON Normal Operation eck Power switch at the back POWER Power OFF panel-> Power adapter & power outlet Link (Normal) Normal Operation BLUE Link Dow n. Optic signal Call Service Provider (Every 1 sec) Optical signal has been lost...
- Page 8 PON ONT Wireless Link Down CALL Service Provider TEL Link Up Normal Operation TEL 1,2 BLUE Tran smitting/Receiving vo ice data Normal Oper ation TEL Link Down CALL Service Provider Rear Panel Indication Description PON Interface 1.25G PON Port Wi-Fi Protect Setup RESET Resets the system to factory default.
-
Page 9: Troubleshooting
Make sure that the ONT is turned on. Once you turn on the power, the POWER LED on the front panel of C524W should be turned on. If the POWER LED is turned OFF, please check if the power cable is connected to the... -
Page 10: Specification
PON ONT Specification Item Description Standard IEEE 802.3ah Type Desktop System Architecture Size (mm) 215(W) x 160(D) x 45(H) Input: 110~220 V ±1 5%, 60 ± 3Hz Power Outpu t: 12V, 1.5 A (power adaptor used) Consu mption: Ma x 10.0W PON interface 1.25G 10 00Base-PX, 1 Core SMF... - Page 11 PON ONT - Support SIP - RTP / RTCP Support RFC 3550 & RFC 3551 - Support call waiting, call holding, call forwarding Three Party Service - Support caller ID di splay (Type 1 and 2) - Support DTMF - Support OAM Remote Loop back test. System Operation Link...