Advertisement
Quick Links
ENG
front runner
Drop down table
TBRA030
READ ME !
Thank you for purchasing a Front Runner Drop Down Table.
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.
Refer to Page 2 for a list of all the components, quantities and tools required.
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this product.
TBRA030_REV_A04
1
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
Advertisement
Related Manuals for Front Runner TBRA030
Summary of Contents for Front Runner TBRA030
- Page 1 FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL. NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
- Page 2 M6 x 30 Button Head Bolt M6 x 12 Button Head Bolt M6 x 12 x 1SS Flat Washer M6 Nyloc Nuts Support Bracket For Jeep JL Spacer 10mm x 8mm ID FIGURE 1.1 TBRA030_REV_A04 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
- Page 3 Open the table and mark out the four fixing points shown in 2.3. Drill 5mm pilot holes on the marks made, using light pressure and taking care only to drill through the interior panel. Open the holes to 12mm. 12mm TBRA030_REV_A04 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
- Page 4 FIT AND SECURE DROP DOWN TABLE TO JEEP JL FOR JEEP JL INSTALLATION Remove the Cover Panel from the rear door interior panel by carefully unclipping it with a panel tool or similar. TBRA030_REV_A04 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
- Page 5 Punch Marks Using an 5mm drill bit, drill a pilot holes in the center of each boss. Open the holes with a 10mm drill bit. Bosses TBRA030_REV_A04 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
- Page 6 Secure the Drop Down Table to the rear door using M6 x 50 Button Head Bolts, M6 SS Spring and M6 x 19 x 1SS Flat Washers (Items 4, 6 & 8) as shown. TBRA030_REV_A04 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
- Page 7 Congratulations! You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner Dealer in person or online. Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam...