Tarmo 323082 Manual page 15

EN
Inverter Generator
When using the equipment, safety precautions must be observed to avoid injuries
and damage. Please read the complete operating instructions and safety regula-
tions with care. Keep this manual in a safe place, so that the information is avail-
able at all times. If you give the equipment to any other person, give them these
operating instructions and safety regulations as well. We cannot accept any liabil-
ity for damage or accidents, which arise due to a failure to follow these instructions
and the safety instructions.
Components identifier
Pulling rod for air-blocking valve
Repair cover
Starting handle
Engine switch
Repair cover for spark plug
323082_aggregaatti_ko_fi-sv-en-et-lv-lt-ru_A4.indd 15
Gas cap ventilation hole
Gas cap
Control panel
Display
Muffler
Tarmo Finland, PO Box 499, FI-33101 Tampere, Finland/ Тампере, Финляндия
Control panel
2. Output indicator light
1. Intelligent gas-saving valve switch
10. USB socket
9. DC socket
8. DC loop protector
Intelligent gas-saving valve
When the engine is disconnected from the electrical equipment, the generator will
slow down automatically. When the engine is connected to the electrical equip-
ment, the generator will return to a faster rotation speed. This installation is used to
reduce gas consumption during the running process. When the intelligent gas-sav-
ing system is closed, the rotation speed of the generator is kept higher than the
standard rotation speed.
Explanation of the warning signs and symbols
Read and understand the safety instructions before using the
generator.
During operation, toxic gases such as carbon monoxide (a col-
orless and odorless gas) are produced. This may lead to suffo-
cation. Only operate the generator outdoors to ensure adequate
ventilation.
Switch the engine off and allow it to cool before refueling the
generator. The fuel is extremely flammable and under cer-
tain conditions can be explosive. Only refuel the generator in
well-ventilated areas ensuring that naked flames, sparks and
cigarettes are not present. Any spillage of fuel should be cleaned
up immediately.
The exhaust gets very hot during operation. Allow the engine to
cool before performing maintenance, refueling or before stor-
ing the generator. Do not touch the exhaust to avoid the risk of
burns and injury.
323082
ko0519
Info/ Tootja/ Ražotājs/ Gamintojas/ Изготовитель:
3. Overload indicator
light
4. Oil pressure warning
light
5. AC socket
6. Display
7. Earth port
28.5.2019 9.16.36