SARAH ELLISON GABRIELLA Assembly Instructions

Floor mirror

GABRIELLA FLOOR MIRROR

ASSEMBLY INSTRUCTIONS

Thank you for purchasing the Sarah Ellison Gabriella Floor Mirror. This

document lists the contents included in your delivery. Please take the time to

identify the hardware, as well as the individual components of this product.

As you unpack and prepare for assembly, place the contents on a carpeted

or padded area to protect them from damage.

NOTE: Be sure to use hardware appropriate for your wall type. Whenever

possible, attach mounting hardware into a wall stud. If you are unsure about

what hardware method you should use, consult a qualified professional or

your local hardware store.

HARDWARE

2x Mounting Hooks (H-1)

4x Nails (H-2)

Measuring tape (Not supplied)

Hammer (Not supplied)

PEOPLE REQUIRED FOR

ASSEMBLY

A minimum of two people are

required to assemble this product

30 minutes

CUSTOMER SERVICE

For Australian customer service contact : info@sarahellison.com.au

For any international customer service inquires please contact the retailer of purchase

page 1 | 4

sarahellison.com.au

Table of Contents

Do you have a question about the GABRIELLA and is the answer not in the manual?

Page 1 GABRIELLA FLOOR MIRROR ASSEMBLY INSTRUCTIONS Thank you for purchasing the Sarah Ellison Gabriella Floor Mirror. This document lists the contents included in your delivery. Please take the time to identify the hardware, as well as the individual components of this product.
Page 2 STEP 1 Open box carefully, ensuring the blade of the knife does not come into contact with the product. Remove packaging and lift the product up out of box and gently place on ground. STEP 2 Holding the mirror in place, determine where you wish to hang your mirror and mark on the wall where the mounting hook anchor should be inserted - in line with the D-ring hooks on the rear of the mirror.
Page 3 With a little care you can prolong the life of your furniture. The following information is only intended as a general guideline. Please follow the instructions to ensure maximum longevity of your Sarah Ellison furniture. Rattan is responsive to its environment, be mindful that heat and moisture can cause movement and cracks in joints and damage lacquer.
Page 4 sarahellison.com.au page 4 | 4...