Loewe REFERENCE 52 SL FHD+ 200 NMP Service Manual page 26

TECHNICAL CUSTOMER SERVICE
The back panel is fastened to the back of the casing with four strips of Velcro (see fig. 20). Pull
the back panel carefully away from the casing to loosen the Velcro strips.
In addition, the upper edge of the back panel is locked into the front frame. To remove the back
panel, a latch in the middle must first be pressed down with the help of a plastic card. The
centre of the back panel may be found from a small screw on the front of the panel. Use your
hand to help you do this (see fig. 21, fig. 22 and fig. 23).
When the latch has been removed from the front of the casing, the back panel can be removed
carefully upwards from the front frame.
Two people must carry out this stage to avoid damaging the set.
Fig. 20
Fig. 21
26
Loewe Opta GmbH
96317 Kronach, Industriestr. 11
96305 Kronach, Postfach 15 54
Telefon (0 92 61) 99-0
Telefax (0 92 61) 99-730
e-mail: loewe@loewe.de
www.loewe.de