Loewe REFERENCE 52 SL FHD+ 200 NMP Service Manual page 23

TECHNICAL CUSTOMER SERVICE
2. Removal of the contrast filter panel
The front panel is connected to the set frame with 6 bolts. To remove the panel, it must be lifted
by two people with the help of two suction cups.
The panel must be lifted vertically upwards (see fig. 14) and then removed towards the front
(see fig. 15).
Fig. 14
Ensure that you are wearing gloves here to avoid fingerprints or other marks on the inside of the
front panel.
3. Removal of the back panel
The back panel is connected to the set frame with a total of 20 Torx screws. Since the back
panel is screwed to the front frame from the front, the loudspeaker grille and the front panel
must first be removed (see point 2).
3.1 Removal of the loudspeaker grille
The loudspeaker grille is fastened from behind to the casing with two T20 Torx screws (see fig.
11). The removal of the service cover is described in section 1.1.
Fig. 11
The loudspeaker grille is locked into the front frame on the right and left-hand sides.
Carefully pull the grill out of the holders of the front frame holding on to its far right and left
edges (see fig. 12).
Fig. 15
23
Loewe Opta GmbH
96317 Kronach, Industriestr. 11
96305 Kronach, Postfach 15 54
Telefon (0 92 61) 99-0
Telefax (0 92 61) 99-730
e-mail: loewe@loewe.de
www.loewe.de