Cloning Connections/Teaching Setup - LG 42PG60C Setup & Operation Manual

Teaching the Master Setup to Another TV
Connections for the LT2002 to Teach another TV the Master Setup
Antenna
or CATV
Teach Master TV's Setup to
the target TV
After learning is complete, remove the M.P.I. cable from the
master TV and connect it to the target TV that you want to
copy the master TV's setup into. With "THE CLONE HAS
CONTROL OF TV" message displayed, press 2 or use either
Channel key to go to the "TEACH TO TV" option, press ON/OFF,
POWER, or ENTER. Select the LT2002 memory that the new
setup is in. Press On/Off to transfer the new setup and other
information to the new TV. Teaching usually takes 2-3 minutes.
After the "TEACHING COMPLETE" message is displayed, press
any key to return to the Clone menu, then press ON/OFF,
POWER, or ENTER. If finished, detach M.P.I. cable from the
target, newly-cloned TV.
Disconnect TV Power for 15 Seconds
Unplug the AC power cord of the newly-cloned TV from the
power outlet for about 15 seconds to activate the newly-
copied setup.
206-4071

Cloning Connections/Teaching Setup

THE CLONE HAS CONTROL OF THE TV
THE CLONE IS VERSION XX
THE TV IS VERSION XX
THE SW IS REVISION XX
CLONE CLOCK = XX:XX
TV CLOCK = XX:XX
-PRESS ANY KEY TO CONTINUE.
-DISCONNECT CLONE WHEN DONE.
Target TV
Ferrite Core
(TDK, ZCAT
2035-0930)
Connect cable to
TV MPI Jack and
Status
follow on screen
Indicator
instructions
MPI
Reset
Color
• green battery ok
• red battery low
Blink pattern
• slow power on
no communications
• heartbeat power on
communications ok
®
QuickSet II Programmer
LT2002
ZENITH ELECTRONICS CORPORATION, LINCOLNSHIRE, ILLINOIS USA
Clone Programmer
CLONE SELECTION MENU
(1) LEARN FROM TV
(2) TEACH TO TV
(3) SET CLONE CLOCK FROM TV
(4) SET TV CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
-TO CHANGE MENU ITEMS, PRESS
CHANNEL KEYS OR DIGITS.
-TO EXECUTE ITEM, PRESS ON/OFF,
POWER, OR ENTER
This menu should appear after any key
is pressed on the Installer remote.
TEACHING IN PROGRESS,
PLEASE WAIT
This display will appear during
Teaching function.
TEACHING COMPLETE
This display will appear after Teaching
is complete.
P A G E 9