GENERAL MODEL 05103V Power Requirement: 8 - 24 VDC (5mA @ 12 VDC) WIND MONITOR Operating Temperature: -50 to 50°C (-58 to 122°F) with VOLTAGE OUTPUTS INTRODUCTION The Wind Monitor measures horizontal wind speed and direction. It is rugged and corrosion resistant, yet accurate and lightweight.
Place orientation ring on mounting post. Do Not tighten band clamp yet. Orientation ring may be omitted when Model 05103V Wind Monitor w / 08234 Propeller portable tripod is used. b) Place Wind Monitor on mounting post. Do Not tighten band WIND SPEED vs PROPELLER RPM clamp yet.
Page 4
b) With mounting post held in position so junction box is facing 2. UNSOLDER TRANSDUCER WIRE due south, orient vane to a known angular reference. Details a) Remove junction box cover, exposing circuit board. appear in CALIBRATION section. b) Remove screws holding circuit board. c) Reach in through front of main housing and turn potentiom- c) Unsolder three potentiometer wires (white, green, black), eter adjust thumbwheel until signal conditioning system...
See Shipper or Invoice Type of Equipment: Meteorological Instruments Model Number / Year of Manufacture: 05103V/1996 I, the undersigned, hereby declare that the equipment specified conforms to the above Directives and Standards. Date / Place: Traverse City, Michigan, USA January 8, 1996 David Poinsett R &...
Need help?
Do you have a question about the 05103V and is the answer not in the manual?
Questions and answers