Remote Controlled Features - Clifford IntelliPage IntelliPage System Car Alarm Owner's Manual

— Additional Remote Engine Starting Features
— IntelliPage provides these AutoStart features:
AutoStart™ Features
n Battery Mode
— With a press on the remote control, you may command the system
to monitor the vehicle battery when you will be away for an extended period of
time. If the voltage drops below a preset level, the system will automatically start
the engine and recharge the battery. If needed, the process will repeat every eight
hours. AutoStart is automatically canceled as soon as the vehicle is driven.
n Temperature Mode
— With a press on the remote, you may set IntelliPage to
AutoStart your vehicle if the engine temperature drops below 15°F (-9°C).
n Dual-Mode
— A press on the remote can set the system to monitor both the
engine temperature and the voltage level and automatically start the engine when
either the battery needs recharging or the temperature drops below 15°F (-9°C).
— Prevents accidental grinding of the starter motor if you
StarterGuard™
inadvertently turn the ignition switch to the starter position while the engine
is running under the control of your IntelliPage.
Gasoline & Diesel Compatibility
automatic transmission vehicle that has either a gasoline or diesel engine
(diesel engine vehicles require an optional adapter).
Automatic Transmission Required
for automatic transmission vehicles.
— Remote Controlled Features —
A Pair of 4-Button/16-Channel Remote Controls
from a typical range of 300 feet. Each remote has a unique high-gloss
rosewood finish that looks as smart as the electronics inside.
Anti-CodeGrabbing™ (ACG) with Random Code Encryption
use a car alarm remote, it transmits a digital code to the alarm. A thief with a
code-grabber can record that code from hundreds of feet away, then play it back
when you're gone to disarm the alarm and unlock the doors. Within seconds,
your car is just another theft statistic. Fortunately, Clifford's Anti-CodeGrabbing
(ACG) randomly changes the code every time you press any of the remote
control buttons. Since the codes are selected by the system's microprocessor
from an electronic file containing several trillion codes, the remote
sends the same code twice, and the control unit
code twice. That makes code-grabbing useless against IntelliPage.
Remote Controlled Engine Start/Shutdown
remote will start or shut down the engine from a typical range of 300 feet.
— The IntelliPage works with any
— The IntelliPage is intended exclusively
— Fingertip command
accepts the same
NEVER
— A press of a button on the
5
—
(cont.)
— When you
NEVER