Siemens SiPass integrated Reference Manual page 47

A6V11144326
Type State (trigger)
Door Opened
Door Tamper
Input Alarm
Input Faulty
Input Isolated
Input Normal
Input Physically
disabled at FLN
device
Input Physically
enabled at FLN
device
Input Sealed
Input Tamper
Input tamper or fault
cleared
Input Unsealed
Pass back Tamper
Pass back Trigger
Intrusion Area Alarm
Armed
Arming Action
Complete
Arming Failed – Input
X in Alarm
Disarmed
Entry Delay Timer
Started
Controller Event Tasks
Description
An event task is triggered when a door monitor
has registered that a door has been opened
for longer than the Input Delay time.
An event task is triggered when a device has
registered that a supervised door monitor input
has been tampered with.
An event task is triggered when an input point
has entered an alarm state.
An event task is triggered when an input point
has become faulty.
An event task is triggered when an input point
has been iso-lated.
An event task is triggered when an input point
has been re-stored to a normal state.
The input has been physically disabled by
setting jumpers on the device.
The Fire Override on the device has been
disabled physically.
An event task is triggered when an input point
has been sealed.
An event task is triggered when a device has
registered that a supervised input point has
been tampered with.
The input tamper state has been cleared /
fixed.
Input has failed a seal check when arming an
Intrusion Area.
An event task is triggered when a device has
registered that a supervised request-to-exit
input has been tampered with.
An event task is triggered when a passback
input has been activated.
An event task will be triggered when the
intrusion area enters an alarm state.
An event task will be triggered when the
specified intrusion area becomes armed.
An event task will be triggered when an
attempt has been made to arm a dependant
area, but not all areas to which it belongs have
been armed first.
An event task will be triggered when the
arming of an intrusion area fails due to an
input that is currently in an alarm state.
An event task will be triggered when the
specified area has been disarmed.
An event task will be triggered when the entry
delay timer has started.
8
Sources
47 | 66