Siemens SiPass integrated Reference Manual page 45

A6V11144326
Type State (trigger)
Audit Trail Enabled
Audit Trail Full
Battery Fail
Battery Low
Battery OK
Network
Communications
Failed
Network
Communications OK
Tamper Active
Tamper Normal
Unit Reset
Device Battery Fail
Battery Low
Battery OK
Battery Present
Invalid Card
Technology selected
Offline
Controller Event Tasks
Description
An event task has been triggered when a
controller event task is triggered when Audit
Trail reporting from the ACC to the Server is
enabled.
An event task has been triggered when a
controller event task is triggered when the
Audit Trail log on the ACC is full.
An event task has been triggered when a
controller event task is triggered when the DC
backup battery connected to the ACC fails.
An event task has been triggered when a
controller event task is triggered when the DC
backup battery connected to the ACC is
operating at a critically low level.
An event task has been triggered when a
controller event task is triggered when the DC
backup battery connected to the ACC is
restored.
An event task has been triggered when the
communications between the SiPass
integrated Server and a controller has been
lost.
An event task has been triggered when the
communications between the SiPass
integrated Server and a controller has been
restored.
An event task has been triggered when the
tamper input to the ACC registers an alarm.
An event task has been triggered when the
tamper input to the ACC registers returns to a
normal state.
An event task has been triggered when the
ACC has been reset.
An event task has been triggered when the DC
backup battery connected to the selected
device fails.
An event task has been triggered when the DC
backup battery connected to the selected
device is operating at a critically low level.
An event task has been triggered when the DC
backup battery connected to the selected
device is restored.
An event task has been triggered when the DC
backup battery connected to the selected
device is recharging.
An event task has been triggered when a card
technology has been selected that is
incompatible with the reader connected to a
Reader Interface Unit.
An event task has been triggered when
communications between the device and the
ACC are disabled.
8
Sources
45 | 66