Remote Control - LG 26LH1DC1 Installation And Operating Manual

Erratic Operation
Installer menu setup.
Wrong Installer menu
settings.
Software problem.

Remote Control

Remote doesn't work.
Remote not in TV mode.
Not aimed at IR remote
sensor.
Remote too far from IR Remote too far from IR
sensor. sensor.
IR path to TV's receiver
obstructed.
Weak batteries.
Wrong battery polarity.
Too much light in room.
Wrong Installer remote
control.
Incorrect Bed 1-2 setting.
Picture Reception
Normal picture, poor or no sound.
Audio muted.
Broadcast problem.
Broadcast Tuning Mode Digital Channel OSD
No Information available display.
Item 103 set to 1 physical
channels tuning.
*Note: For other problems not caused by the 26LH1DC1, refer to other devices' operating guide.
Adjust Installer menu settings as required.
8
Remove TV power cord for 15 seconds.
8
Use Mode key to select TV; puts remote into 26LH1DC1 mode.
8
Point remote at TV's IR receiver on TV.
8
Move remote closer to TV's IR receiver or darken room.
8
Remove obstructions.
8
Replace batteries.
8
Check that "+" and "-" match in battery compartment.
8
Dim room light.
8
Requires compatible Installer remote, contact your LG dealer.
8
Set correct Bed 1-2 setting.
8
Press MUTE or use Volume Up key to increase sound level.
8
Try a different channel.
8
Set Item 103 to 0 for information to be added to virtual channel tuning digital OSD.
8
73