Run A Blood Glucose Test On Your Pet - Advocate PetTest BMB-EV099X Manual

2. Wash your hands and the test site with warm water and
soap to ensure accurate results. Thoroughly dry your
hands and test site of your pet. (If using a 70% isopropyl
alcohol prep pad to clean the site, let it air dry before
sampling.)
3. Prepare lancing device and lancet according to instructions
included with the device.
4. After sampling, gently apply pressure to the test site with
sterile gauze or cotton wool to help stop the blood flow.

Run a Blood Glucose Test on Your Pet

1. Insert test strip from vial or foil-wrap
Fully insert the test strip into the meter until you feel it stop
against the end of the meter guide.
*Please tear off the middle part of foil package if needed
to open.
2. Choose Dog Mode/ Cat Mode/ CTL mode
You can choose from three modes by pressing M button. If
you miss the desired mode, you can continue pressing M
button to cycle through the mode choices again.
Dog Mode
When the dog marker is displayed and
the flashing blood drop ( ) indicator
appears on the display, go to step 3 for
obtaining a drop of blood or press M
button to move to Cat Mode.
Cat Mode
When the cat marker is displayed and
the flashing blood drop ( ) indicator
appears on the display, go to step 3 for
obtaining a drop of blood or press M
button to move to CTL Mode.
17
AM
AM