Use The Alarm - Advocate PetTest BMB-EV099X Manual

When "CLr" is displayed on the screen,
ALL memory is deleted.
After pressing Set button or deleting
memory, all set-ups are completed.
The meter will show "OFF" and then
turn off automatically.
Notes:
The date, time and alarm can ONLY be changed in the setting
mode. Therefore, when performing a glucose testing, those
parameters cannot be altered.
There are 3 kinds of average settings (7-, 14-,and 28-day)
which you can access from the meter memory. These averages
are calculated from results obtained during the 7-, 14-,and
28-day preceding the current date settings. Beware that when
you reset the date, the averages will be re-calculated and
updated automatically based on the new date.
The date and time might need to be adjusted due to daylight
savings.
The date and time setting might need to be reset after you
replace the batteries.
If no button is pressed for 2 minutes, the meter will turn off
automatically.

Use the Alarm

When the alarm sounds, the meter will
automatically turn on. The alarm will keep
sounding for 30 seconds. You can perform
a test or turn off the meter.
12
AM