FujiFilm GFX 50s Manual page 10

GFX 50S Owner's Manual:
Focus-Point Selection
Checking Focus
To zoom in on the current focus area for precise
focus, press the control to which focus zoom
has been assigned (at default settings, the cen-
ter of the rear command dial). Press the control
again to cancel zoom.
Normal display
N In focus mode S, zoom can be adjusted by rotating the rear command
dial. Focus area selection using the focus stick is available during focus
zoom. Focus zoom is not available in focus mode C or when G AF/MF
SETTING > PRE-AF is on or an option other than r SINGLE POINT is
selected for AF MODE.
To assign focus zoom to a control, select FOCUS CHECK for
D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING.
5
P
69
Focus zoom
Ver. 4.00