Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gamma Luxe Cannon 600 Z IP
Summary of Contents for Gamma Luxe Cannon 600 Z IP
- Page 1 Luxé Cannon Leko Cannon LED 300 600 Z IP (VW) (CW/WW) User Manual IP65 ①...
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS Becareful with your operations.With a dangerous voltage you cansuffer a dangerous electric shock when touching wires! This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. - Page 3 If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. Please pay attention below warnings before using this fixture! ③...
- Page 4 Unpacking Thank you for choosing Leko Cannon 300 -CW+WW. For your own safety, please read this manual before installing the device. This manual covers the important information on installation and applications. Please install and operate the fixture with following instructions. Meanwhile, please keep this manual well for future needs.
-
Page 5: Features And Specifications
③ Leko Cannon ① -CW+WW ②POWER cable ③ User Manual ③ FEATURES & SPECIFICATIONS Feature ： * 1 * 300W COB LED (Cool White+Warm White 2in1) * Color temperature: 3000K-6000K * 50,000 hours life time and low power consumption * Optimized high definition optical system for improved photometric performance and field uniformity * Projector-quality, high contrast aspheric lens * Glass reflector that removes greater than 90% infrared radiation (heat) and reflects greater than... -
Page 6: Specifications
Specifications ： *Input Voltage:AC100-240V 50/60Hz *Max. Power: 300W *Net Weight: 16.5kg *Gross Weight: 20kg *Production size: 76.76*29.73*27.37CM *Packing size: 86*37*35cm(1pc/carton) DMX-512 CONTROL CONNECTIONS Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the moving head. -
Page 7: Dmx Output
POWER IN DMX OUTPUT DMX INPUT COMMON 1:Ground DMX+ 2:Data(-) 3:Data(+) DMX- DMX Input 3-Pin XLR DMX512 Out DMX512 In 3-Pin XLR 3-Pin XLR 120Ω Pin3 Pin2 ⑦... - Page 8 For installations where the DMX cable has to run a long distance or is in an electrically noisy environment, such as in a discotheque, it is recommended to use a DMX terminator. This helps in preventing corruption of the digital control signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω...
- Page 9 Multi-light working in the same time When using controller to control multi lights to work in strobe, the controller just send the channel data . The strobe effect will be depend on each light itself . And please take attention for the follow situation: 1.
-
Page 10: Operation Status
6.2 Operation Status Mode Display Description DMX Mode Dxxx “D”stand for DMX mode Temperature M-WP “M”stand for stand Master, “WP”stand for“White Mode Point” DMX Menu Enter DMX mode: 1. If you are in DMX mode,the main menu will turn into DMX menu automatically after 5 seconds 2. -
Page 11: Motor Control
1. DMX mode: When the DMX 512 signal is connected correctly and the data of channel 1 which is bigger than 0, use the received DMX data value for dimmer and temperature control Vice Menu 7.1 Master Mode: (Color temperature) Menu State Operation... - Page 12 to Point A) 128~191 Point B gradually raise to M1、M2 Angle control (Over the maximum angle Point B) 192~255 Point B gradually drops M1、M2 Angle control (Back to the level of point A to Point B) 0~255 Refer to M1 M3、M4 Position control 0~255 Refer to M2...
-
Page 13: Dmx Channels
frequency with data of 100HZ 25000HZ Dimmer Curve Choose Standard dimmer curve Incandescent Linear Quick Over Temperature Set the protect 45~95 Increase decrease temperature with data of 5 Backlight Adjust 10%~100% Increase decrease Backlight with data of 5% brightness Backlight Timeout Set the screen screen protect or screen Increase... - Page 14 Channel Data Function Remark 0~255 Dimmer 0~11 3000K Color 8 = 1*8 Totally 31 kinds temperature 1 of color temperature. 12~19 3100K Each 8 data is for 16 = 2*8 Quick color: If a color 20~235 3200K~5800K (V = N*8) you need the temperature 236~243...
-
Page 15: Operation & Specifications
OPERATION & SPECIFICATIONS ·The Leko Cannon 300 is for on-site decoration purpose. · Don't turn on the fixture if it's been through severe temperature difference like after transportation because it might damage the light due to the environment changes. So make sure to operate the fixture until it is in normal temperature. - Page 16 If you are not qualified or have any doubts about hanging the led profile spotlight then do NOT hang it. Do not clamp the safety cable to the U bracket or clamp. That is not a secondary safety point. A secondary safety point is any point that will adequately hold the led profile spotlight if the "C" clamp or half cheesboro fails.
-
Page 17: Cleaning And Maintenance
Cleaning and maintenance Now ignoring maintenance and cleaning is very good way of creating problems "down the road" and many companies and installations do just that. However the net result is, no matter what the fixture, premature failure! Changing the oil in a car, most people do on a regular basis. So with the fixtures, regular maintenance it an excellent practice, if you want the fixtures to last.