Sharp UA-KCP100E Operation Manual page 17

PRODUCT FUNCTIONS (F1-F7)
Function
Light Control
You can select the brightness of the Display and
Cleanliness Indicator.
Plasmacluster Ion ON/OFF
Auto Restart
If the product is unplugged or if there is a power
failure, the product will resume operation with the
previous settings after power is restored.
Adjusting sensor sensitivity (F4 - F6)
Light Sensor
Sensitive Dust Sensor
Odour Sensor
Sound Indicator Setting
You can set the product to make a beeping sound
when the Humidifying Tray is empty.
OFF
When set to "OFF", the "Dim" light illuminates
for 8 seconds after operation starts and then the
light goes off.
However, some indicators that need notification
will remain dim.
Dim
Auto
(default)
Light automatically switches ON or OFF based
on room brightness.
• Room is bright: light is ON
• Room is dark: light is OFF
Even though room is bright, the light will turn off
when operating in sleep mode.
OFF
ON
(default)
Cancellation
ON
(default)
Low
Standard
(default)
High
Cancellation
ON
EN-15
Setting
(default)