Controller And Navigation - G&D VERTICAL AIR Series Installation Manual & User Manual

INSTALLATION GUIDE • USER MANUAL I

CONTROLLER AND NAVIGATION

:UP
:ENTER
:DOWN
Set Screens:
1. Glycol set point: Ensure you see
a. You can change options from SET, INFO and POWER by using the UP and DOWN
buttons.
b. Press ENTER to navigate to the glycol temperature set screen.
c. Press ENTER again to navigate to the numerical readout. Use UP and DOWN buttons to
adjust to desired setpoint.
2. Pump pressure set point: Ensure you see
a. Press DOWN until you see pump pressure set point.
b. Press ENTER button to navigate to numerical readout and adjust with UP and DOWN to
set pump pressure. Please note that pressure setpoints are preset.
Info screens:
1. Ensure you see
2. Press ENTER to navigate to the first information screen.
3. Use DOWN to scroll through the information screens.
Alarms:
1. Press ALARM.
2. Navigate with UP and DOWN to see current alarms.
a. To clear the alarms, press UP or DOWN through alarm screen until you see a prompt
saying "press Alarm button for 3 seconds."
b. To check alarm history, cycle through all active alarms and press "enter to data logger."
G&D CHILLERS, INC.
in the bottom right portion of the display screen.
GD-VA-R2022C
•
ALARM
:
:PROGRAM
:ESCAPE
in the bottom right of the display screen.
in the bottom right of the display screen.
VERTICAL AIR SERIES
:SET
:INFO
:POWER
15