Table of Contents
Advertisement
USING THE XL POWER SMOOTHIE BOWL
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
NOTE: If the unit is plugged in and powered
on, but the XL bowl and blade assembly is
not properly installed, the timer will display
- -" and the motor will be disabled.
1
Plug in motor base and place on a clean,
dry, level surface such as a countertop
or table.
2 Add ingredients to the XL Power
Smoothie Bowl. DO NOT add liquid past
the LIQUID FILL line or ingredients past
the MAX FILL line.
3 Place the Hybrid Edge Blades Assembly
on the top of the smoothie bowl and turn
clockwise to seal.
18 AU 02 8801 7666 | NZ 0800 112 660
4 Turn the XL smoothie bowl upside down
and install on motor base by aligning the
tabs on the smoothie bowl with the slots
on the base. Then, rotate smoothie bowl
clockwise until it clicks. Once locked in
place, press the Power button to turn unit
on. The available program buttons will
illuminate and the unit will be ready for use.
NOTE: While processing, twist the built-in
tamper counterclockwise continuously.
5a If using an Auto-iQ program, use the dial
select the program that best suits your
desired output, then press START/STOP.
During the blending process, ensure to
twist the built-in tamper counterclockwise
continuously. The preset feature will
automatically stop at the end of the
program. To stop the unit at any time,
press START/STOP.
5b For Manual mode, press IQ/MANUAL. With
speed 10 on the display, press START/STOP.
During the blending process, twist the built-in
tamper counterclockwise continuously. Once
the ingredients have reached your desired
consistency, press START/STOP and wait for
the unit to come to a complete stop.
NOTE: Only speed 10 is available when
using the XL smoothie bowl.
6 Remove the XL smoothie bowl
from the motor base by turning it
counterclockwise and then lifting up.
7 Remove the blade assembly by twisting
counterclockwise. DO NOT store blended
contents with the blade assembly
attached. Only use the spout lid or
storage lid to cover. Exercise care when
handling the blade assembly, as the
blades are sharp.
AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
8 To enjoy on the go, place the spout
lid or storage lid onto the smoothie
bowl and twist lid clockwise until
firmly sealed.
9 Turn the unit off by pressing the Power
button. Unplug the unit when finished.
Refer to the Care & Maintenance
section for cleaning and storage
instructions.
19
Advertisement
Table of Contents
