Advertisement
Assembling the Power Nutri™ Bowl & Power Nutri Cup
OR
1.
Fill container with desired
contents. Screw on the
blade assembly until you
have a tight seal.
PRESS THE POWER
IF USING POWER
1.
Use the dial to select
If using the Power Nutri
an Auto-iQ® program
Bowl, twist the Power
or manual speed, then
Paddle counterclockwise
press START/STOP to
continuously while
begin blending.
Taking It To Go?
Place the Storage Lid or Spout Lid on top
of the bowl or cup, and turn clockwise to seal.
NOTE: DO NOT microwave or freeze the Power Nutri Bowl or Power Nutri Cup.
WARNING: Handle the blade assembly with care, as the blades are sharp.
OR
2.
Flip container upside
down and install on base.
Rotate clockwise until it
clicks into place.
Blending
BUTTON TO TURN THE UNIT ON.
NUTRI CUP,
SKIP STEP 2.
2.
3.
When blending is
complete, remove the
container from base.
Then, remove the blade
processing.
assembly from container.
SMOOTHIE BOWL
BASICS
USING THE POWER NUTRI
1.
Add milk, or milk alternative such
as soy, coconut, almond, or oat
milk, up to the LIQUID FILL line.
ALWAYS DO THIS FIRST.
3.
(Optional)
Amplify your base by adding
1 scoop of yogurt, flavor powder,
protein powder, and/or nut butter.
5.
After blending is complete, add your favorite toppings, such as
coconut flakes, granola, fresh bananas, berries, and agave nectar.
DID YOU KNOW?
Smoothie bowls are
thicker & spoonable,
compared to
smoothies which are
thinner & drinkable.
BOWL
™
2.
Add frozen fruit, directly from freezer,
and/or açai or dragon fruit packets,
up to the MAX FILL line.
Cut larger fruit, like bananas, in quarters.
If using açai or dragon fruit packets,
thaw slightly and cut in quarters.
4.
Screw on the blade assembly and
install the bowl on the motor base.
Select BOWL and press
START/STOP. Twist the Power
Paddle counterclockwise
continuously while processing.
Advertisement
