Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for djm direct DJMSS406
Summary of Contents for djm direct DJMSS406
- Page 1 Item No.:DJMSS406 Scroll Saw SCROLL SAW Original Operating Manual...
-
Page 2: Device Description
1.Introduction 2.Device Description MANUFACTURER: 1. Power Cord & Plug DJM Direct.com 2. Blade Guard 3. Clamping Screw Unit 43 Churchill Way, 4. Suction Adapter Lomeshaye Industrial Estate, 5. Star Button Nelson, Lancashire BB9 6RT UK 6. Angle scale DEAR CUSTOMER 7. - Page 4 3. Unpacking Protect eyes, face, and head from objects that may be thrown from the unit. Always wear safety goggles or ●Open the packaging and remove the device carefully. safety glasses with side shields when operating. ●Remove the packaging material as well as the Wear appropriate hearing protection.
-
Page 5: Specific Safety Rules
Do not use the cable for purposes for which it is not • Take care of your tools. Keep cutting tools sharp intended. Do not use the cable to pull the plug out of and clean in order to be able to work better and more the outlet. -
Page 6: Technical Data
6. Contents Supplied • Impossibility of stopping the machine in the best possible conditions The scroll saw comes partially assembled and is • Variations in the rotational speed of tools shipped in carefully packed carton. After all the • Failure of the power supply parts have been removed from the carton, you •... -
Page 7: Application Conditions
7. Introduction 9. Machine Use and Care -Do not use low-output electric tools for heavy work. Your new Scroll saw will more than satisfy your Do not use the electric tool for purposes for which it expectations. It has been manufactured under is not intended. -
Page 8: Operation
10. Operation 11. Setting the Saw Bench • Release the star button and bring the saw Mounting the machine on a work bench bench to a right angle in relation to the saw blade. A workbench made from solid wood is better than Use a 90°... -
Page 9: Inside Cuts
12. Inside Cuts Warning: Switch off the saw andremove the mains supply plug before doing inside cuts in order to avoid injuries caused by unintentional activation of the saw. This saw is suited also to inside cuts cut not starting at the edge of the work piece. Proceed as follows: •... -
Page 10: Maintenance
Lighting System (For #65115B) 1. Saw blade removal. Extract the saw-blade by Press "I" to turn on the lamp. unscrewing the Clamping screw. Remove the saw- Press "O" to turn off the lamp blade from the upper and lower support by slightly pressing the upper arm down. - Page 11 Changing the flat saw-blade (Optional Feature #1) 5. Put the saw-blade with the two adapter into the lower support, the other end into the upper 1. Take out the adapter. Fix the saw-blade with support. allen screws using allen wrench. 6.
- Page 12 14. Lubrication 16. Maintenance Servicing Lubricate the saw arm bearings every 50 hours. Pull the mains plug before any adjustments, Proceed as above figure shown. maintenance or repair. Turn the saw to the side. Have any work on the device that is not described in Apply a generous amount of SAE 20 oil to the this instruction guide performed by a professional.
-
Page 13: Troubleshooting
17. Storage Store the device and its accessories in a dark, dry and Danger! Store the Scroll Saw a way frost-proof place that is inaccessible to children. The it cannot be started by unauthorised optimum storage temperature is between 5 and 30˚C. persons and that nobody can be injured. - Page 15 Description Description Screw M5×12 39 Screw M4×20 Flat Washer Ø5 40 Lock Washer Ø4 Body Outside Cover 41 Upper Clip Base 42 Bushing Bolt M8×20 43 Lower Clip Spring Washer Ø8 44 Eccentric Bushing Flat Washer Ø8 45 Screw M8×8 Support Bracket 46 Small Shaft Sleeve Screw M6×12...
-
Page 16: On/Off Switch
Description Description 77 Power Cord & Plug 96 Cable Clamp R-5.3 78 Circuit Board 97 Rubber Sleeve 79 Switch Board 98 Double Core Cable 80 Screw ST4.2×16 99 Lamp Cover 81 ON/OFF Switch 100 Led Lamp 82 Cable Holder 101 Lamp Holder 83 Star Button M6x13 102 Pipe Clamp 1 84 Big Flat Washer Ø6... - Page 17 Scroll Saw - Part. No. DJMSS406 2006/42/EC Machinery Directive 2014/30/EU EMC Directive EN ISO 12100:2010 EN 55014-1:2017 EN 55014-2:2015 EN 61000-3-2:2014 EN 61000-3-3:2013 Date:05/17/2021...
Need help?
Do you have a question about the DJMSS406 and is the answer not in the manual?
Questions and answers