djm direct DJMSL10 Translation Of Original Operating Manual
  1. Manuals
  2. Brands
  3. djm direct Manuals
  4. Saw
  5. DJMSL10
  6. Translation of original operating manual

djm direct DJMSL10 Translation Of Original Operating Manual

10 single bevel compound sliding mitle saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DJMSL10 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for djm direct DJMSL10

Summary of Contents for djm direct DJMSL10

  • Page 2: Device Description

    1.Instroduction 2.Device Description MANUFACTURER: 1. Saw arm DJM Direct.com 2. Release knob Unit 43 Churchill Way, Lomeshaye Industrial Estate, Nelson, 3. Operating handle Lancashire BB9 6RT UK 4. Upper fixed blade guard 5. “G” Clamp DEAR CUSTOMER 6. Rotating blade guard We hope your new tool brings you much enjoyment and success.

  • Page 3: Intended Use

    Children and infirm people must not use this tool. Children should be supervised at all times if they are in the area in which the tool is 3. Unpacking being used. It is also imperative that you observe the accident - Open the packaging and remove the device care-fully.
  • Page 4 The mitre saw can be safely carried by the main handle but only once Read all these instructions before attempting to operate this product it has been removed from the mains power and secured in the locked and save these instructions. down position.
  • Page 5 - Keep cutting tools sharp and clean for better and safer can result in serious injury to the user, as well as damage to the tool. performance. If in doubt, do not plug in the tool. Using a power source with a - Follow instruction for lubricating and changing accessories.
  • Page 6 · Never use a damaged or deformed saw blade. · Use correctly sharpened saw blades and observe the maximum · When cutting round wood, use clamps that prevent the speed marked on the blade. Ensure the speed marked on the saw workpiece from turning on both sides of the blade.

  • Page 7: Rotating Lower Blade Guard

    Spindle lock button The spindle lock button (20) prevents the blade in the saw from 9. Operating rotating. Depress and hold the spindle lock button while installing, changing, or removing the blade. Avoid unintentional starting of the machine. During assembly and for all work on the machine, the power plug must not be connected to Rotating lower blade guard the mains supply.
  • Page 8 Setting the fence square with the table 15. Lower the blade guard, hold the rotating lower blade guard (6) 1. Make sure that the electrical plug is removed from the power and blade bolt cover (8) in position and tighten the fixing screw to point.

  • Page 9: Compound Mitre Cut

    A bevel cut is made by cutting across the grain of the workpiece with 5. Loosen the bevel lock (10) and move the saw arm (1) to the left to the blade angled to the fence and mitre table. The mitre table is set the desired bevel angle (between 0°and 45°).

  • Page 10: Maintenance

    11. Maintenance Warning! Prior to any adjustment, maintenance or service work Important information disconnect the mains power plug! In the event of an overloading the motor will switch itself off. After a 11.1 General maintenance measures cool-down period (time varies) the mo-tor can be switched back on - Keep all safety devices, air vents and the motor hous-ing free of dirt again.
  • Page 12 10” Mitre Saw – Part. No. DJMSL10 Data: 02/13/2019...

Table of Contents