djm direct DJMSL8 Translation Of Original Operating Manual
  1. Manuals
  2. Brands
  3. djm direct Manuals
  4. Saw
  5. DJMSL8
  6. Translation of original operating manual

djm direct DJMSL8 Translation Of Original Operating Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DJMSL8 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for djm direct DJMSL8

Summary of Contents for djm direct DJMSL8

  • Page 2: Dear Customer

    1.Instroduction 2.Device Description MANUFACTURER: 1. Laser light DJM Direct.com 2. Laser light on/off switch Unit 43 Churchill Way, Lomeshaye Industrial Estate, Nelson, 3. Saw arm Lancashire BB9 6RT UK 4. Release knob 5. Operating handle DEAR CUSTOMER 6. Upper fixed blade guard We hope your new tool brings you much enjoyment and success.

  • Page 3: Intended Use

    3. Unpacking Even when the tool is used as prescribed it is not possible to - Open the packaging and remove the device care-fully. eliminate all residual risk factors. The following hazards may arise in - Remove the packaging material as well as the packaging and connection with the tool’s construction and design: transport bracing (if available).

  • Page 4: Not Intended Use

    ·Use correctly sharpened blades and observe the maximum speed - Avoid body contact with earthed or grounded surfaces (e.g. pipes, marked on the blade. radiators, ranges, refrigerators). ·Do not remove any cut-offs from the cutting area until the guard is 4 - Keep other persons away fully locked in place and the blade has come to rest.
  • Page 5 16 - Remove adjusting keys and wrenches saw blade. Do not operate saw without guards in place. Do not - Form the habit of checking to see that keys and adjusting perform any operation freehand. Never reach around saw blade. wrenches are removed from the tool before turning it on.
  • Page 6 · Rags, cloths, cord and string and the like should never be left · Keep the floor area around the machine level, well maintained and around the work area. free of loose materials. · Avoid cutting nails. Inspect the workpiece and remove all nails and ·...
  • Page 7 Remove all packaging material from the machine and the accessories or breathing-in the dusts can cause allergic reactions and/or lead to provided. respiratory infections of the user or bystanders. Before starting the operation of the machine for the first time, check Certain dusts, such as oak or beech dust, are considered as if all parts listed in the box content section have been supplied carcinogenic, especially in connection with wood-treatment additives...

  • Page 8: Setting The Cutting Depth

    Setting the Fence Square with the Table –Remove the flat washer, outer blade washer and the blade. –Wipe a drop of oil onto the inner blade washer and the outer blade –Make sure that the electrical plug is removed from the power point. washer where they contact the blade.

  • Page 9: Electrical Connection

    - Clean the equipment regularly with a damp cloth and some soft - Passage points, where connection cables are passed through soap. Do not use cleaning agents or sol-vents; these may be windows or doors. aggressive to the plastic parts in the equipment. Ensure that no - Kinks where the connection cable has been improp-erly fastened or water can get into the interior of the equipment.
  • Page 11 8-1/4” Mitre Saw – Part. No. DJMSL8 Data: 02/13/2019...

Table of Contents