Da Vinci Hypermax OXYGEN Instruction Manual page 13

6
S T E P
S I X
HOSE
SET-UP
You're now ready to attach the hoses.
NOTE: there are two very different hoses. First, the smaller hose is for the
HyperMax Oxygen concentrator. This small hose will connect to the port of
the oxygen concentrator at top right rear as shown. Make sure that the
hose is securely attached to the port.
The bigger second hose has a bright red cap on its end. This red end cap is
designed with a spring on the inside that is preset from the factory — so
there's no need for adjustment. The end-cap allows the HyperMax Bag/
Cylinder to fill with oxygen without the bag/cylinder over-inflating and/
or letting any oxygen be released until you're ready — so make sure the
red end-cap is on ONLY when filling your bag with oxygen.
davincimedicalusa.com
13