Advertisement
3
S T E P
T H R E E
FRAME
SET-UP
(CONT'D)
Locate the long, thin shipping tube you received from HyperMax. This
long tube contains the four poles you will need to complete the set up of
your HyperMax frame.
One at a time, you want to remove the short colored poles and set them
aside. These small poles are temporary and designed for shipping — but
the long black poles are used for the actual HyperMax frame.
Start by inserting each long pole, one at a time, into each hole at the base
of the frame. It's important to make sure that you get all four rings on a side
of the Oxygen Bag/Cylinder onto a pole, and then repeat this step three more
times. Once you have all four poles in the frame bottom, with all four rings on
each pole, you will then push each pole down firmly into its proper fitting.
These poles will connect the bottom to the top of the frame.
davincimedicalusa.com
10
Advertisement
