Da Vinci Hypermax OXYGEN Instruction Manual page 11

4
S T E P
F O U R
FRAME
SET-UP
(CONT'D)
Next, lay the entire frame down on its side. Take the frame top you removed
earlier and position it directly on top of each of the four poles, fitting it snugly
onto the poles. Make sure that you secure each pole firmly into its proper
position on the top of the frame, so that the frame doesn't separate when
the HyperMax Cylinder is full of oxygen. Once the frame top is secure, then
lift the entire frame back up to its permanent upright position.
davincimedicalusa.com
11