Nikon Z 9 Reference Manual page 71

Autofocus
AF-area mode
Focus lock
Vibration reduction (VR)
Camera on-
board VR
Lens on-board
VR
Flash
Flash control
Flash mode
Flash
compensation
Flash-ready
indicator
Accessory
shoe
Pinpoint (available in photo mode only), single-point,
dynamic-area (S, M, and L; available in photo mode only),
wide-area (S, L, C1, and C2), and auto-area AF; 3D-
tracking (available in photo mode only); subject-tracking
AF (available in video mode only)
Focus can be locked by pressing shutter-release button
halfway (single-servo AF/AF-S) or by pressing the center
of the sub-selector
5-axis image sensor shift
Lens shift (available with VR lenses)
TTL: i-TTL flash control; i-TTL balanced fill-flash is used
with matrix, center-weighted, and highlight-weighted
metering, standard i-TTL fill-flash with spot metering
Front-curtain sync, slow sync, rear-curtain sync, red-eye
reduction, red-eye reduction with slow sync, off
−3–+1 EV (choose from step sizes of
Lights when optional flash unit is fully charged; flashes as
underexposure warning after flash is fired at full output
ISO 518 hot-shoe with sync and data contacts and safety
lock
Post-Upgrade Specifications for "C" Firmware Version 3.00
1 1
/ and / EV)
3 2
71