Nikon Z 9 Reference Manual page 36

•
After establishing a wireless connection to
the UltraSync BLUE, select [On] or [On (with
HDMI output)] for [Timecode] > [Record
timecodes] in the video recording menu to
start receiving time codes. The camera
shooting display will show the same time
code values as the UltraSync BLUE.
•
If no time code is received, the shooting display will show "--:--:--:--" (or
"00:00:00:00" when an external device is connected via HDMI). No
time codes will be recorded if filming is begun at this stage.
D
Cautions: Using the UltraSync BLUE
•
Time codes will not be recorded if [H.264 8-bit (MP4)] is selected for
[Video file type] in the video recording menu.
•
The UltraSync BLUE allows users to choose the frame rate. If the value is not
a match for that chosen with the camera, time codes will not be recorded
or output via HDMI. Match the frame rate for the UltraSync BLUE to the
video recording frame rate as follows:
Video recording frame rate
120p, 60p, 30p
100p, 50p, 25p
24p
- Select 29.97 fps DF for drop-frame recording.
- See the documentation for the UltraSync BLUE for information on
choosing a frame rate.
New "ATOMOS AirGlu BT Options" Item
36
UltraSync BLUE frame rate
29.97 fps, 29.97 fps DF
25 fps
23.98 fps