Quha Zono X User Manual page 9

To pair the mouse with a second device
1. Turn off Bluetooth on any previously paired device that's in the same
space, so that the mouse can't connect to it automatically. Turn on
Bluetooth on the device you want to pair with your mouse and enable
adding a new Bluetooth device.
2. To turn the mouse on, press the power switch for 1 second. Once the
mouse is turned on, the LED should start flashing blue, indicating that the
mouse is currently not connected to any previously paired device.
3. To place the mouse in pairing mode, press the power switch for 5
seconds. The LED will start flashing blue and red alternately once the
mouse enters pairing mode.
3. To pair, select "Zono X" when it appears in the list of available devices
on the screen. Follow any additional on-screen instructions.
Once the mouse is connected to the new device, the LED will flash green
every 5 seconds. The mouse cursor will appear on the new device's screen
and you will see "Zono X" in its connected devices.
If you have two or more paired devices within range, you need to turn off
Bluetooth on the devices that you are not using. The mouse will connect to
the available device automatically.
If you want to uninstall the mouse on your device, you need to remove
"Zono X" from its paired devices. Refer to the instructions on your device
for information on how to remove Bluetooth devices.
9