Charging The Battery - Quha Zono X User Manual

Charging the battery

The Quha Zono X mouse has a rechargeable battery that needs to be charged
before the first use. To charge the battery
1. Connect the charging dock to the USB port of a computer or to a separate
USB charger using the provided USB-C cable. Only use an approved
charger.
2. Place the mouse into the slot on the magnetic charging dock. It will snap
into the correct position automatically, and charging will begin
immediately on contact. A flashing green LED indicates that the battery
is charging.
It takes approximately 2 hours to fully charge an empty battery. The LED
indicator will turn solid green once the battery is fully charged. The mouse
will turn off automatically once you lift it off the charging dock.
You can use the mouse for up to 18 hours on a single charge. You can leave
the mouse on the charger overnight. When the battery charge level gets low
during use, the LED will start flashing red and the buzzer will start playing a
low battery alarm sound (1 beep every 1 minute).
If you have connected the mouse to a computer, you can check its battery
percentage in your computer's Bluetooth settings. Check the instructions on
your computer.
NOTE! If the mouse turns off because of low battery charge, it will not
activate again until you connect it to the charger.
7