Gestures - Quha Zono X User Manual

Gestures

The Quha Zono X mouse has built-in gesture detection for activating three
commonly used mouse features hands free. Gestures are turned on by
default. You can turn them on and off with the Quha Zono X setup software.
To activate a gesture action, you need to turn your head right and left or up
and down a certain number of times. The buzzer will help you perform the
movements correctly: you will hear one beep once you have completed one
part of the required motion pattern; an ascending sound sequence will
confirm that you have completed the entire gesture (except for the exit
gesture). All the gestures start by first holding the mouse still for about 1
second.
Pause
To activate: hold still 1 s - move right - left - right - left
Pause stops the mouse cursor and keeps it still until you make the exit
gesture. Depending on the settings of you computer or mobile device, the
mouse cursor may or may not disappear once the pause mode is activated.
Scroll
To activate: hold still 1 s - move up - down - up - down
With the scroll function you can scroll a window by turning your head up
and down. Once you have completed the scroll gesture, you will have 5
seconds for moving the mouse cursor on the window you want to scroll. The
buzzer will beep rapidly during the 5 seconds. Once 5 seconds have passed,
you will hear a sound sequence confirming that the scroll mode is active,
18