Turning The Mouse On And Off; Resetting The Mouse - Quha Zono X User Manual

Turning the mouse on and off

NOTE! When you turn the mouse on for the first time, it will go into
Bluetooth pairing mode automatically, so that it's ready to connect to
the first computer or mobile device (See p. 8).
To turn the mouse on, press the power switch for 1 second. You will hear a
start-up sound and The LED indicator will first flash turquoise once. Once
the mouse is connected to your computer or mobile device, the LED will
start flashing green every 5 seconds, indicating that the mouse is in normal
usage mode. The mouse cursor will appear on the screen.
NOTE! If the LED flashes blue, the mouse is not connected to your paired
device. Make sure that Bluetooth is turned on, that the devices are close to
each other and that there are no obstacles between them.
To turn the mouse off, press the power switch for 1 second. You will hear a
power-down sound and the LED will flash red once before the mouse turns
off.

Resetting the mouse

Resetting the mouse clears its pairing history and any other changes to its
settings. To reset the mouse, first turn it on. Then press the power switch for
15 seconds. You will hear 3 beeps and the LED will turn red for a while.
Once the reset is finished, the mouse will turn off. When you turn the mouse
on after a reset, it will go into pairing mode automatically.
10