Table of Contents
Advertisement
Selecting and Adjusting the Screen
After selecting
To select an input signal for PBP.
To adjust the size of the PBP screen. (FULL/4:3)
To adjust the image of the PBP screen; Press the
PBP IMAGE. Use the
the sub-menu may vary depending on the type of the source.
To turn the PBP sound on/off.
To switch the main-screen and sub-screen in PBP mode.
Note
The
in the
menu, the following menu items can be adjusted.
buttons to adjust the item to the desired level. The items of
* The sub-menu can differ according to the type of the input signal.
menu will be disabled if the PBP screen input is video.
A31
DVI DIGITAL
button to display the submenu for
Adjust PBP screen contrast.
Adjust PBP screen brightness.
Advertisement
Table of Contents
