Note
When connected to your computer, the
PIP/POP/PBP is in use.
To choose the language in which the control names are
displayed.
To select the image size of the screen. (FULL/1:1)
To adjust position of the OSD window on the screen.
Press the
button to display the submenu for OSD
POSITION.
To adjust the transparency of the OSD menu screen.
Use this function to zoom in the screen. When you turn the monitor
off and on again, the default screen size will be restored.
Press the
button to display the submenu for OSD
POSITION.
* If the zooming value is set to '0', vertical
and horizontal positioning cannot be
adjusted.
Use this function to reset the monitor to the factory default.
However, language selection will not be initialized.
will be disabled if the screen size is 1:1 or
A22
Moving the OSD screen position horizontally.
Moving the OSD screen position vertically.