Table of Contents
Advertisement
Selecting and Adjusting the Screen
Pops up the
Select a menu
menu screen
icon
1
Press the
Button, then the main menu of the OSD appears.
2
To access a control, use the
3
When the icon you want becomes highlighted, press the
4
Use the
5
Accept the changes by pressing the
6
Exit the OSD by Pressing the
You need to adjust the screen display when connecting the monitor to a
new computer or changing the mode. Refer to the following section to
set an optimal monitor screen.
Press the AUTO/SELECT button (
in the PC analog signal. Then, an optimal screen status will be selected
that fits into the current mode.
If adjustment is not satisfactory, you need to adjust screen position,
clock and phase in the OSD menu.
Select a menu icon
•
Buttons.
Buttons to adjust the item to the desired level.
Button.
Button.
in a remote controller)
A19
Adjust the status
Save
adjustment
Button.
Exit from the
menu screen.
Advertisement
Table of Contents
