Tektronix 1502C User Manual page 73

Operator Tutorial
2–22
13. Press MENU again to enter normal operations mode. Note that the VIEW
STORE and VIEW DIFF indicator blocks have disappeared. This tells you
that both of these functions have been disabled.
14. Press STORE. This activates the Max Hold function. Notice that the STORE
indicator block has darkened.
15. With a clip lead or other device, short the far end of the test cable, then
remove the short. Note that both conditions now appear on the display.
ac
O
N
O
N
Figure 2–29: Short and Open Viewed via Max Hold
n
16. Turn the POSITION control counterclockwise. THe waveform will strobe
o
down the display, leaving traces of its movement.
ac
O
N
O
N
Figure 2–30: Waveform Strobed Down Display in Max Hold
17. Press STORE. The display will clear, awaiting STORE to be pressed again,
which would activate another Max Hold monitor cycle.
0.000 ft
0.000 ft
1502C MTDR User Manual