Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Frizzlife MS99
Summary of Contents for Frizzlife MS99
- Page 1 OWNER’ S MANUAL Model: MS99...
-
Page 2: Table Of Contents
CONTENT 1.BEFORE INSTALLATION 2.PRODUCT INTRODUCTION 3.INSTALLATION TIPS 4.INSTALLATION METHODS Under Sink Water Valve Refrigerator Angle Valve 5.FILTER CARTRIDGE REPLACEMENT 6.MAINTENANCE 7.LIMITED PRODUCT WARRANTY... -
Page 3: Before Installation
Thank you for purchasing Frizzlife MS99 refrigerator water filter system. If you have any questions or need any assistance, please contact: support@frizzlife.com Installation video Search 'Frizzlife MS99 Installation' on www.YouTube.com Register to get 150% warranty 1. Email us your order ID and full name at support@frizzlife.com. -
Page 4: Product Introduction
Use the 1/4" quick fitting to connect two sections. To connect: please push the tubing into the fitting and make sure it is fully inserted. Then put the blue lock clips on the fitting, it will lock the tubing in place. Model: MS99 Page 2... -
Page 5: Installation Methods
(not included). Installation Method 1 Under Sink Water Valve + PEX Tubing(included)/Copper Tubing(not included) ------ Page 4 Installation Method 2 Refrigerator Water Valve + PEX Tubing(included)/Copper Tubing(not included) ------ Page 8 Model: MS99 Page 3... -
Page 6: Under Sink Water Valve
PEX Tubing - Under Sink Water Valve Step 1: Install the bracket onto a wooden plate Take off the bracket from the Mount the bracket with provided system.Mark the spots of three screws. screws on the wooden plate. Model: MS99 Page 4... - Page 7 Step 3: Connect the filter with tubings If the space is too narrow Twist off the filter cap from the system. Attach the 1/2" straight fittings on both of the "supply" &"filtered" side of the filter cap. Model: MS99 Page 5...
- Page 8 Open the water valve. Check for leaks the sink or proper place for draining. and flush the filter for 5-10 min. (It is common to observe black particles as carbon fines for the first time flush.) Model: MS99 Page 6...
- Page 9 Shut off the water supply. Open the water valve. Connection Connect the other end of outlet complete. tubing to your refrigerator. Step 7: Check the leaks MS99 Cold Copper Tubing(not included) - Under Sink Water Valve Model: MS99 Page 7...
-
Page 10: Refrigerator Angle Valve
Step 2: Connect the refrigerator water valve with inlet tubing Shut off the water supply. Remove the nut and compression insert from the 1/4"Straight Fitting. Model: MS99 Page 8... - Page 11 "supply" side of the cap by screwing up the hex nut. Attach another 1/4" PEX tubing to the "filtered" straight fitting by screwing up the hex nut. Model: MS99 Page 9...
- Page 12 Step 6: Connect the system to your refrigerator Shut off the water supply. Open the water valve. Connection Directly connect the other end of complete. outlet tubing to your refrigerator Step 7: Check the leaks MS99 Model: MS99 Page 10...
-
Page 13: Filter Cartridge Replacement
Use the wrench to unscrew the housing body. Change Take out the old cartridge and load with the new one, then install back in the same way. Please flush the new cartridge for 5-10 minutes before starting to use. Model: MS99 Page 11... -
Page 14: Maintenance
Frizzlife is not liable for cost of removal, installation, transportation or any other charges in connection with a warranty claim. Frizzlife is not liable for anything that we deem as abuse of the units, including but not limited to, misuse of product outside of intended use, equipment modifications, unauthorized repairs, improper installation, damage from freezing, hot water, fire or other acts of God outside of Frizzlife control. - Page 15 150% Extended Warranty 1. Email us your order ID and full name at support@frizzlife.com. 2. Scan the QR code below to register Model: MS99 Page 13...
Need help?
Do you have a question about the MS99 and is the answer not in the manual?
Questions and answers