Changing Basic Settings; Setting The Time; Home Connect - Siemens SN67Z801BE User Manual

Table of Contents

Advertisement

en Home Connect
Basic setting
Wi-Fi
Remote Start
Greeting
Factory setting
1
Factory setting (may vary according to model)

Changing basic settings

Open the appliance door.
1.
Press
⁠ .
2.
To open the basic settings, press
3.
for approx. 3 seconds.
Press
repeatedly until the display
4.
shows the required setting.
Press
or
5.
display shows the right value.
You can change several settings.
To save the settings, press
6.
approx. 3 seconds.
Close the appliance door.
7.

Setting the time

To open the basic settings, press
1.
for approx. 3 seconds.
Press
repeatedly until the display
2.
shows "Time setting".
Press
or
3.
display shows the required time.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
40
Selection
on
off
off
Manual
Permanent
1
on
off
Reset
repeatedly until the
repeatedly until the
Description
Switch the wireless network connection on or off.
The basic setting "Wi-Fi" is only available once
the appliance is connected to the Home Connect
app.
→ "Home Connect ", Page 40
Activate or deactivate
→ "Remote Start ", Page 41.
This basic setting is not available until after you
have connected the device with the Home Con-
nect app.
→ "Home Connect ", Page 40
Switch display of the brand name logo on or off
when the appliance is switched on.
Restore changed settings to the factory settings.
The settings for initial start-up must be con-
figured.
Holding down
change the set values in 10-minute
steps.
To save the settings, press
4.
approx. 3 seconds.
Home Connect
Home Connect
This appliance is network-capable.
Home Connect
Connect your appliance to a mobile
device to control its functions via the
for
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
and to the Home Connect app.
and
will
for
1
)

Advertisement

Table of Contents
loading

Table of Contents