What Each But Ton/Chan Nel Does - Clifford concept 50x Owner's Manual

What each button/channel does
Your Concept 50x remote controls come preprogrammed so that certain channels
command certain functions. The following chart indicates what each remote control
channel number does, and how to transmit each channel number.
Fac tory set tings of the 12 re mote con trol chan nels
Transmittin
g channel
number:
1
arm or disarm and lock or unlock the doors
optionally turn on a timed device (if the system is armed)
2
optionally pop the boot (if the system is disarmed)
3
4
5
arm or disarm a Concept 50x on your second vehicle
Command a Concept 50x on your second vehicle to
optionally turn on a timed device (if the system is armed)
6
optionally unlatch the boot (if the system is disarmed)
7
controlled by a Concept 50x on your second vehicle
activate another optional accessory
8
controlled by a Concept 50x on your second vehicle
9
10
remotely turn off one or both sensor zones
11
controlled by a Concept 50x on your third vehicle
activate another optional accessory
12
controlled by a Concept 50x on your third vehicle
Press button 1 (channel 1) once. You will hear two chirps and the
TO ARM
THE SYS TEM. . . . . . . . indicator lights will flash twice. The dashboard LED will flash
repeatedly and the car doors will automatically lock.
Press button 1 (channel 1) again. One chirp and one indicator
TO DIS ARM
THE SYS TEM. . . . . . . .
light flash confirms disarming. In addition, the doors will auto-
matically unlock and the interior lights will turn on and stay on
for 30 seconds or until you start the engine, whichever occurs first.
Press button 3 (channel 3). Your Concept 50x system will arm or
TO SI LENTLY
ARM OR DIS ARM disarm with all the indications noted above except for the chirp
THE SYS TEM. . . . . . . .
acknowledgments.
Causes the system to:
AND
silently arm or disarm
activate an optional accessory
AND
activate an optional accessory
remotely enable/exit valet mode
activate an optional accessory
7
Press the How Press
LevelShift many button
button? times? number
no — 1
no — 2
no — 3
no — 4
yes once 1
yes once 2
yes once 3
yes once 4
yes twice 1
yes twice 2
yes twice 3
yes twice 4