What Each Button/Channel Does - Clifford Cyber 3 Owner's Manual

What each button/channel does

Your Cyber 3 remote controls come pre-programmed so that certain channels
command certain functions. If you wish, you can actually assign any channel to any
function (see pages 13-14). The following chart indicates what each remote control
channel number does, and how to transmit each channel number.
Factory settings of the 12 remote control channels
Transmitting
channel
number:
1
arm or disarm and lock or unlock the doors
2
optionally pop the trunk (if the system is disarmed)
3
4
activate optional accessory function #1
5
remotely enter or exit valet mode (see page 9)
6
activate optional accessory function #2
7
activate optional accessory function #3
8
activate optional accessory function #4
9
activate optional accessory function #5
10
activate optional accessory function #6
11
activate optional accessory function #7
12
activate optional accessory function #8
Press button 1 (channel 1) once. You will hear two chirps and
TO ARM
THE SYSTEM . . . . . . .
the parking lights will flash twice. The dashboard LED will
flash repeatedly and the car doors will automatically lock.
Press button 1 (channel 1) again. One chirp and one parking
TO DISARM
THE SYSTEM . . . . . . .
light flash confirms disarming. In addition, the doors will
automatically unlock and the interior lights will turn on and
stay on for 30 seconds or until you start the engine, whichever
occurs first.
Press button 3 (channel 3). The system will arm or disarm
TO SILENTLY
ARM OR DISARM . . .
with all the indications noted above except the chirp
acknowledgments.
Causes the system to:
silently arm or disarm
7
Press the How Press
LevelShift many button
button? times? number
no — 1
no — 2
no — 3
no — 4
yes once 1
yes once 2
yes once 3
yes once 4
yes twice 1
yes twice 2
yes twice 3
yes twice 4