Using Your Appliance; Operation; Refrigerator Compartment - Scandomestic WKS263W User Manual

functions and usage remain the same.
Using your
appliance
Movable shelves/trays
Depending on the model, various glass, plas-
tic storage shelves or wire trays are included
with your appliance.
The walls of the refrigerator are equipped
with a series of runners so that the shelves
can be positioned as desired.
Remove and install the door
shelf
Warning: The door shelf must not be re-
moved and installed by the user! If the door
shelf is damaged contact the customer help-
line for assistance.
To replace the door shelf, the below steps
can be followed:
•
Remove the door shelf
•
Press the right side of the door shelf in-
ward while holding the left side. When
the notch of the shelf has been detached
from the refrigerator door, remove the
rack obliquely upward.
Install the door shelf
•
First tilt the left side of the door shelf,
and make sure the notch has been fas-
tened to the door.
•
Then press the right side inward, push it
down to the right place.

Refrigerator compartment

For storing food that does not need to be fro-
zen. The appliance have different sections
suitable for different kinds of food.
Vegetable Drawer
For storing fruit and vegetables.

Operation

Starting up and temperature regula-
tion
•
Insert the plug of the connection lead
into the plug socket with protective
earth contact. When the refrigerator
compartment door is opened, the inter-
nal lighting is switched on. After the
fridge has been placed in position, wait
for 5 minutes before electricity is sup-
plied. Don't store anything until the
temperature inside the fridge becomes
low enough.
•
The temperature knob is located on the
right of the refrigerator compartment.
•
For optimum food preservation, a me-
dium setting is generally the most suita-
ble.
Setting O means: Off. Clockwise rotate the
knob to turn on the appliance.
Setting 1 means: Highest temperature,
warmest setting.
Setting 7 means: Lowest temperature, cold-
est setting.
•
Important! Normally we advise you se-
lect setting of 2 or 3 or 4. If you want the
temperature higher or colder, please
turn the knob to warmer or colder set-
ting accordingly. When you turn the
knob to colder can result in more en-
ergy-consumption.
•
Important! High ambient temperatures
(e.g., on hot summer days) and a cold
setting (position 6 to 7) may cause the
compressor to run continuously or even
non-stop!
•
Reason: when the ambient temperature
is high, the compressor must run contin-
uously to maintain the low temperature