Installing Your New Appliance; Installation Positioning; Electrical Connection - Scandomestic SKS92WE User Manual

Table of Contents

Advertisement

Available languages

Available languages

Installing Your
New Appliance
Cleaning before use
Before using the appliance for the first
time, wash the interior and all internal
accessories with lukewarm water and
neutral soap in order to remove the
typical smell of a brand new product,
then dry thoroughly.
Important! Do not use detergents or
abrasive powders, as these will dam-
age the finish.

Installation Positioning

Warning! Before installing, read the
instruction carefully for your safety
and the correct operation of appli-
ance.
Position the appliance away from
sources of heat such as stoves,
radiators, direct sunlight, etc.
Maximum
performance
safety are guaranteed by main-
taining the correct indoor tem-
perature for the class of unit con-
cerned, as specified on the rating
plate.
This appliance performs well
from N to T.
The appliance may not work
properly if it is left for a longer
period at a temperature above or
below the indicated range.
Appliances must not be exposed to
rain. Sufficient air must be allowed to
circulate in the low rear section of the
appliance, as poor air circulation can
affect performance. Built-in appli-
ances should be positioned away from
heat sources such as heaters and di-
rect sunlight.
Leveling
The appliance should be level in order
to eliminate vibration. To make the
appliance level, it should be upright
and both adjusters should be in stable
contact with the floor. You can also
adjust the level by unscrewing the ap-
propriate level adjustment in the
front (use your fingers or a suitable
spanner).
and

Electrical connection

Caution: Any electrical work required
to install this appliance should be car-
ried out by qualified or authorized
personnel
Warning: This appliance must be
grounded. The manufacturer declines
any liability should these safety
measures not be observed.
Ventilation of appliance
To improve efficiency of the cooling
system and save energy, it is neces-
sary to maintain good ventilation
Climate
Ambient temperature
class
SN
+10°C to +32°C
N
+16°C to +32°C
ST
+16°C to +38°C
T
+16°C to +43°C

Advertisement

Table of Contents
loading

Table of Contents