Analog Current Output Function Parameter List - Mitsubishi Electric 800 Series Instruction Manual

4.4

Analog current output function parameter list

When the FR-A8AN is mounted on the inverter, the following parameters are extended.
Perform the settings as required.
Pr. Pr. group
306 M303 Analog output signal selection
307 M340 Setting for zero analog output
308 M341 Setting for maximum analog output
309 M342 Analog output signal voltage/current switchover
310 M343 Analog meter voltage output selection
311 M344 Setting for zero analog meter voltage output
Setting for maximum analog meter voltage
312 M345
output
323 M346 AM0/AM2 0V adjustment
324 M347 AM1/AM3 0mA adjustment
C0(900) M310 FM/CA terminal calibration
C1(901) M320 AM terminal calibration

The setting values are the same as those of Pr.158. For details, refer to the Instruction Manual (Detailed) of the inverter.
NOTE
• For Pr. 306 and Pr. 310, write is enabled even when the inverter is operating.
Name Setting range

0 to 100%
0 to 100%
0, 1, 10, 11

0 to 100%
0 to 100%
900 to 1100%
900 to 1100%


Minimum
Initial value
increments
1 2
0.1% 0%
0.1% 100%
1 0
1 2
0.1% 0%
0.1% 100%
1% 1000%
1% 1000%
 
 
ANALOG CURRENT OUTPUT
4
25