LG LRM2060ST Installation Instructions page 3

6
1. Slide the microwave oven part way into the
cabinet opening.
Bottom Duct
Anti-Tip
Bracket
2. Bottom bracket must be flat to the cutout floor
to engage correctly with the anti-tip bracket as
shown.
3. Plug in the microwave oven.
4. Center the microwave oven within the cutout
opening and slide the microwave oven in place,
engaging the anti-tip bracket.
5. Ensure the microwave oven is accurately
centered .
1 2 " Screw
6. Drill pilot holes through the positioning flange
and then install three
the bottom duct as shown.
Anti-Tip Assembly
1 2 " Screw
Bottom Bracket
Cutout Opening
Positioning Flange
/ " screws at the front of
1
2
7
1. Place the trim frame over the microwave oven.
2. Make sure the trim frame is level and the
microwave oven is centered within the trim
frame. Mark four center positions through the
four mounting holes of the trim frame.
NOTE: Center the trim frame equally on all four
sides.
3. Remove the trim frame and drill four pilot
holes.
Pilot Hole
1" Screw
Trim Frame
4. Attach the trim frame by using four screws.
8
1. Your trim kit is now fully installed. Replace
any loose items that were removed from the
inside of the microwave oven.
2. Please keep these installation instructions for
future reference.
3
Cutout Opening
Mounting Hole