Acuity Brands HOLOPHANE CORTEZ CZQ4L Manual

Acuity Brands HOLOPHANE CORTEZ CZQ4L Manual

120v-347v emergency lighting unit
Hide thumbs Also See for HOLOPHANE CORTEZ CZQ4L:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

CZQ4L & CZQ6L
EMERGENCY LIGHTING UNIT
Installation and wiring ................................................................................... P. 2-3
Testing and maintenance ..............................................................................P. 4-5
NOTE: Product versions that are certified in the CA Title 20 Appliance Efficiency Database are marked
BC on the product label.
!
WARNING:
FAILURE TO FOLLOW THESE INSTRUCTIONS AND WARNINGS MAY RESULT IN DEATH, SERIOUS INJURY OR
SIGNIFICANT PROPERTY DAMAGE
maintaining this equipment. These instructions do not attempt to cover all installation and maintenance situations. If you do not understand
these instructions or additional information is required, contact Holophane.
!
WARNING: RISK OF ELECTRIC SHOCK – NEVER CONNECT TO, DISCONNECT FROM OR SERVICE WHILE EQUIPMENT IS
!
ENERGIZED
.
WARNING:
DO NOT USE ABRASIVE MATERIALS OR SOLVENTS. USE OF THESE SUBSTANCES MAY DAMAGE FIXTURE,
WHICH MAY RESULT IN PERSONAL INJURY.
!
WARNING
: RISK OF PERSONAL INJURY – This product may have sharp edges. Wear gloves to prevent cuts or abrasions when removing
!
from carton, handling, installing and maintaining this product.
WARNING:
The battery used in this device may present a risk of fire or chemical burn if mistreated. Temperature range 50 °F -104 °F (10°C -
40°C). Do not disassemble, heat above 70° C (158° F), or incinerate. Replace battery only as directed on the battery label and page 5 of these
instructions. Use of unauthorized battery voids warranty and UL listing of this product and may present a risk of fire or explosion.
•Disconnect A.C. power before servicing.
•All servicing should be performed by qualified personnel.
•Consult your local building code for approved wiring and installation.
•Do not use outdoors unless used with Acuity Brands accessories appropriate to the application.
•Do not mount near gas or electric heater.
•Equipment should be mounted in locations and at heights where it will not readily be subjected to tampering by unauthorized personnel.
•The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.
•Do not use this equipment for other than intended use.
AND DELIVER TO OWNER AFTER INSTALLATION
Remote test option
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions
should always be followed, including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
- For your protection, read and follow these warnings and instructions carefully before installing or
SAVE THESE INSTRUCTIONS
(120V-347V)
ENGLISH/FRENCH
CORTEZ
"TEST" button / Status I
ndicator
Press latches to disengage
housing from mounting plate
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HOLOPHANE CORTEZ CZQ4L and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Acuity Brands HOLOPHANE CORTEZ CZQ4L

  • Page 1 •All servicing should be performed by qualified personnel. •Consult your local building code for approved wiring and installation. •Do not use outdoors unless used with Acuity Brands accessories appropriate to the application. •Do not mount near gas or electric heater.
  • Page 2: Installation And Wiring

    INSTALLATION and WIRING page 2 IMPORTANT: Provide each unit with a single-phase AC un-switched power supply from a circuit used for normal lighting. Operating voltage shown on table on page 3. NOTE: The battery must be connected to the charger board prior to applying AC power to the unit. Battery damage may occur if the battery is connected longer than 24 hours without continuous AC power provided.
  • Page 3: Final Assembly

    INSTALLATION and WIRING (CONTINUED) page 3 FINAL ASSEMBLY Federal Communications Connect the polarized battery plug to Housing attachment to mounting plate: the charger board. Make certain that Make certain all wires and connectors are Commission (FCC) Requirements: This device complies with FCC Title the battery cable is routed to avoid routed to avoid interference with other interference with the AC input...
  • Page 4: Testing And Maintenance

    TESTING and MAINTENANCE page 4 IMPORTANT BATTERY INFORMATION: NOTE: Emergency lighting systems should be tested in Batteries are perishable items. For best results, it is accordance with NFPA 101 or as often as local codes recommended that the batteries receive an initial charge within require, to ascertain that all components are operational.
  • Page 5: Battery Replacement

    TESTING and MAINTENANCE page 5 BATTERY REPLACEMENT Unit features and battery details shown may vary. See also “Battery Connection”, page 3. Disconnect battery from charger board. Replace battery, secure the strap Re-assemble the unit (see also snugly, and reconnect to the charger step 5, page 3).
  • Page 6 CORTEZ Part # 912-00027-202 Rev. A, 04/2020 LIFE SAFETY SOLUTIONS © 2020, Acuity Brands Lighting, Inc. TEL: 740-345-9631 www.holophane.com All Rights Reserved.
  • Page 7: Mesures De Protection Importantes

    •Consultez votre code du bâtiment local pour le câblage et l'installation approuvés. •Ne pas utiliser à l'extérieur à moins d'être utilisé avec les accessoires Acuity Brands appropriés à l'application. •Ne pas installer à proximité de chauffages au gaz ou électriques.
  • Page 8 Tension de fonctionnement indiquée sur le tableau de la page 3. INSTALLATION et CÂBLAGE Page 2 IMPORTANT : Fournissez à chaque unité une alimentation monophasée CA non commutée provenant d'un circuit utilisé pour l'éclairage normal. Tension de fonctionnement indiquée sur le tableau de la page 3. REMARQUE : La batterie doit être connectée à...
  • Page 9: Assemblage Final

    INSTALLATION et CÂBLAGE (SUITE) Page 3 ASSEMBLAGE FINAL Exigences de la Commission Connectez la fiche de la batterie Boîtier de fixation à la plaque de montage : polarisée à la carte du chargeur. Assurez-vous que tous les fils et connecteurs fédérale des communications (FCC - Federal Communications Assurez-vous que le câble de la...
  • Page 10 ESSAIS et ENTRETIEN Page 4 REMARQUE : Les systèmes d'éclairage d'urgence doivent INFORMATIONS IMPORTANTES SUR LA BATTERIE : être soumis à des essais conformément à la norme NFPA Les batteries sont des produits périssables. Pour de meilleurs 101 ou aussi souvent que les codes locaux l'exigent, afin de résultats, il est recommandé...
  • Page 11: Remplacement De La Batterie

    ESSAIS et ENTRETIEN Page 5 REMPLACEMENT DE LA BATTERIE Les caractéristiques de l'unité et les détails de la batterie peuvent varier. Voir aussi « Branchement de la batterie », page 3. Débranchez la batterie de la carte du Remplacez la batterie, fixez la sangle Remonter l'unité...
  • Page 12 Ce document a été traduit de l’anglais pour en faciliter la lecture. En cas d’incohérence entre le texte en anglais et cette traduction, le texte anglais prévaut.Toutes les marques citées appartiennent à leurs propriétaires respectifs. Les marques de commerce d’Acuity Brands Lighting qui arborent le symbole ® sont déposées aux États-Unis et peuvent l’être dans d’autres pays.

This manual is also suitable for:

Holophane cortez czq6l

Table of Contents