Huawei SUN2000-20KTL-M3 Quick Manual page 16

3. Set LAN parameters.
If the SmartLogger is connected to a
•
local area network (LAN) and a proxy
server has been set, you need to cancel
the proxy server settings.
• If the SmartLogger is connected to the
Internet and the PC is connected to the
LAN, do not cancel the proxy server
settings.
a. Open Internet Explorer.
b. Choose Tools > Internet Options.
c. Click the Connections tab and then click
LAN settings.
d. Clear Use a proxy server for your LAN.
e. Click OK.
8.2 Commissioning Through Deployment Wizard
1. Enter https://XX.XX.XX.XX in the address
box of the browser (XX.XX.XX.XX is the
default IP address of the SmartLogger). If
you log in to the WebUI for the first time,
a security risk warning is displayed. Click
Continue to this website.
2. Select an User Name to log in.
Parameter Description
Language Set this parameter as required.
User name Select admin.
• The initial password is
Changeme. Use the initial
password upon first power on
and change it immediately after
login. To ensure account
security, change the password
periodically and keep the new
password in mind. Not changing
the initial password may cause
password disclosure. A
password left unchanged for a
Password
long period of time may be
stolen or cracked. If a password
is lost, devices cannot be
accessed. In these cases, the
user is liable for any loss caused
to the PV plant.
• If you enter wrong passwords
for five consecutive times within
5 minutes, your account will be
locked out. Try again 10
minutes later.
15