Huawei SUN2000-20KTL-M3 Quick Manual page 15

2. Connect to the solar inverter WLAN and log in as installer to access the device commissioning
screen.
8
System Commissioning (SmartLogger Web)
1. The operating system of Windows 7 or later is supported.
2. The WebUI snapshots are for reference only, and the actual display prevails.
Preparations and WebUI Login
8.1
1. Connect the network cable between the network port on the PC and the SmartLogger.
2. Set the IP addresses of the PC and SmartLogger in the same network segment.
IP Settings
Port
IP address
LAN port Subnet mask
Default gateway
IP address
WAN port Subnet mask
Default gateway
When the IP address of the WAN port is on the 192.168.8.1–192.168.8.255 network segment,
the IP address of the LAN port is automatically switched to 192.168.3.10, and the default
gateway is 192.168.3.1. If the connection port is a LAN port, adjust the network configuration
of the PC accordingly.
SmartLogger Default Value
192.168.8.10
255.255.255.0
192.168.8.1
192.168.0.10
255.255.255.0
192.168.0.1
14
PC Setting Example
192.168.8.11
255.255.255.0
192.168.8.1
192.168.0.11
255.255.255.0
192.168.0.1