Advertisement
Example: To change the AutoArming feature from "on" to
"off," you would do the following:
Turn the ignition key to the ON position.
Flick the valet switch back and forth 4 times (you'll hear a chirp each
time to help you count to the total of 4 chirps).
Wait 3 seconds. The system will sound one more chirp to confirm
that the AutoArming setting is now off (1 chirp = off, 2 chirps = on).
Turn the ignition off. That's all there is to it! To change the
Adding new remote controls
For other drivers in your family, or if you wish to control Clifford systems on your
other cars with the same remote control, you can buy additional Clifford remote
controls from any Clifford Dealer (or call our Customer Service Department at
800-824-3208) and program them into the system yourself. Each ACE 100 will
respond to as many as four remote controls. To add a new remote control to the
system, use the procedures noted in the User-selectable features section on page 6.
How to erase the codes of lost or stolen remote controls
If one of your remote controls is ever lost or stolen, you can erase its digital codes
from the system memory to make sure that the missing remote control can never be
used to disarm your system. Just use the Adding new remote controls procedure
noted above for a total of four times (e.g., if you have one remote control remaining,
program it four times; if you have two remote controls, program each twice).
one or more of the following Clifford Electronics patents:
4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464;
4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215;
5,157,375; 5,467,070; 5,650,774 and other patents pending
© Copyright Clifford Electronics, Inc., 1997
ACE 100 is covered by
31-837A/A1OM/997
Advertisement
